Rollback+™
U-Shaped Front Edge
An elevated front curve catches water that would otherwise shoot straight over the lip in a downpour, and rolls it back into the trough.
Leaf Guards · Greater Sudbury
Alu-Rex guards fitted straight onto the gutters you already have. No new eavestrough, no ladder every fall.
What A Leaf Guard Does
A leaf guard is a perforated aluminum cover that fits over your existing eavestrough. Leaves, needles and shingle grit stay on top and blow off. Water still goes through.
Both Alu-Rex systems we install are retrofits — they go on the gutters you already have, so you're not replacing a trough that's working fine.
We install Alu-Rex guards — the same manufacturer behind the Continuous Hanger™ systems we use on new eavestrough installs.
Perforated aluminum, cut to your roofline and fastened down the full run.
How Gutter Clean Pro® Works
Gutter Clean Pro® uses two layers of perforated aluminum instead of one. Each layer is doing a different job.
Water straight through the guard, debris straight off the front. No trough to clean out afterwards.
Rollback+™
U-Shaped Front Edge
An elevated front curve catches water that would otherwise shoot straight over the lip in a downpour, and rolls it back into the trough.
Vortex™
Pulls Water Through
The two membranes work together to create suction, draining up to three times the volume of the heaviest storms on record.
Eclipse™
Offset Perforations
The holes in the two layers don't line up. Water finds its way through; pine needles and fine grit don't.
The Alu-Rex Line
Two retrofit guards that go on the gutters you already have, and two Continuous Hanger™ systems that reinforce the trough at the same time. We'll tell you which you need when we look at the property.
Dual-Layer · Heavy Debris
Two layers of perforated aluminum with large oblong openings over offset micro-perforations. This is the one for a property under pines or heavy tree cover.
Single-Layer · Lighter Debris
The original single-layer perforated aluminum guard. It's been on roofs long enough to prove itself, and it's the right call on an open lot with a few trees.
Continuous Hanger™ · Maximum Protection
Guard and hanger in one patented piece. It keeps ice and debris out of the trough while reinforcing it along the full run — built for heavy debris and metal roofs.
Continuous Hanger™ · Strength Only
Not a guard — a hanger. T-Rex® locks the trough to the fascia along the whole run instead of every 24 inches, so it can't sag or pull away. The choice where debris isn't the problem.
Common Questions
"They did a thorough and efficient job, starting by cleaning out my gutters prior to the installation of the gutter guard. Very pleased with the quality of workmanship. They provided me with photos of the completed job since I have a two storey home."
John Gallien
Not sure which one?
We'll look at what's overhanging your roof and tell you straight.
Yes. Both Gutter Clean Pro® and Gutter Clean System® are retrofit products designed to fit existing eavestroughs. We'll check the condition of your trough and fascia first — if the gutter itself is failing, a guard on top of it won't fix that, and we'll tell you so.
It depends on what's falling. Gutter Clean Pro®'s dual-layer design is for heavy tree cover, especially pines — the offset perforations stop needles that a single layer lets through. Gutter Clean System® is the proven single-layer option for open lots with lighter debris.
Gutter Clean Pro® will. That's what Eclipse™ technology is for — the holes in the two aluminum layers are deliberately offset, so water works its way through but needles and fine grit sit on the surface and blow off.
Always. There's no point sealing a season of debris under a new guard. We clear the trough and downspouts, check the flow, and then the guard goes on.
Not for gutter cleaning. The guard keeps the trough clear, and anything that lands on top dries out and blows off. Both systems carry a clog-free warranty — 25 years on Gutter Clean System®, lifetime on Gutter Clean Pro®.
DoublePro® for heavy tree cover, pine needles, or a metal roof where snow and debris come off fast — it guards and reinforces at the same time. T-Rex® for open properties with little debris, where you want the trough locked down solid but don't need a cover over it.
Yes. Reinforcing the trough end to end stops the movement and flex that opens up gaps at the corners and pulls the gutter away from the fascia. Less movement, fewer leaks.
Yes, on every job. Most of this work happens above a second storey where you can't see it, so you get before-and-after photos of the finished run.
13 showcases shown.